Skip to content
Intelligent Machine Control Systems for Precision Earthworks
Real-time GNSS guidance for excavators — accurate to 3cm.
EGS101 Intelligent Excavator Guidance System
How Machine Control Systems Work
A machine control system combines GNSS positioning, IMU sensors, and an on-cab display to give operators real-time guidance on bucket or blade position relative to a target design surface. Rather than relying on manual grade checks or surveyor stakes, the system continuously compares the machine’s actual position against the desired elevation or slope — delivering instant, actionable feedback directly to the operator.
Modern systems support multi-constellation GNSS (GPS, BDS, GLONASS) for robust signal coverage in open field environments, while high-precision IMU sensors compensate for machine tilt and bucket angle changes in real time.
Key Applications in Earthworks & Farmland Construction
Machine control systems are widely used across earthworks operations where precision and repeatability matter:
- Land leveling — Maintain target elevation across large areas with minimal rework
- Trenching & drainage — Consistent depth and alignment without manual measurements
- Slope grading — Real-time angle monitoring for canal banks, road shoulders, and pond embankments
- Embankment construction — Straight-line guidance for uniform compaction layers
In high-standard farmland construction specifically, grade accuracy directly impacts irrigation efficiency and long-term field productivity — making ±3cm precision not just a spec, but an operational requirement.
What to Look for in a Machine Control System
With multiple solutions on the market, here are the criteria that matter most for excavator-based earthworks:
- Accuracy — Look for systems that maintain height accuracy within 3cm regardless of bucket angle or vehicle tilt
- Excavator compatibility — The system should support a wide range of excavator models without complex hardware modifications
- Setup simplicity — One-click calibration and minimal parameter input reduce downtime on site
- Hardware durability — IP67-rated components with wide operating temperature ranges (-40°C to +70°C) are essential for field conditions
- Ongoing software support — Free upgrade paths ensure the system stays current without additional investment
The AllyNav EGS101 — Built for High-Standard Farmland Construction
The EGS101 is designed specifically for excavator-based precision earthworks, delivering real-time bucket guidance across land leveling, trenching, slope grading, and embankment construction.
Key advantages that set it apart:
- ±3cm height accuracy maintained across all bucket and arm movement combinations
- One-click height calibration — no manual measurement, no surveyor dependency
- Triple-protection hardware — IP67 tablet, antenna, and IMU sensor rated for harsh field environments
- Broad excavator compatibility — deploys across multiple machine models without custom integration
- Free software upgrades — continuous improvement with no recurring licensing cost
Where enterprise-grade systems require extensive setup and IT infrastructure, the EGS101 is engineered for fast deployment and straightforward operation — making professional-grade machine control accessible for farmland contractors and equipment operators alike.
Ready to Bring Precision to Your Next Project?
Whether you’re leveling fields, cutting drainage channels, or grading embankments, the EGS101 delivers the accuracy and reliability your operation demands.
Discover More Precision Applications
Frequently Asked Questions
Can the EGS101 be used on any excavator brand?
Yes. The EGS101 is designed for broad compatibility and can be installed on most mainstream excavator brands without requiring custom hardware modifications or factory integration.
How long does it take to install and set up the system on a new machine?
Installation is straightforward. Once mounted, the system requires minimal parameter input and uses one-click height calibration — most operators are ready to work within a short setup period without specialist training.
What are the main components of a grade control system?
Yes. The IMU sensor continuously compensates for vehicle tilt and bucket angle changes, so guidance accuracy is maintained regardless of the machine’s orientation or ground conditions.
Is an internet connection or cloud platform required to operate the system?
No. The EGS101 operates as a standalone on-machine system and does not depend on cloud connectivity or a data subscription to function. 4G and Wi-Fi are available for optional data transfer when needed.
